Date: July 1, 2016
Posted By: Becky Doiron (Marketing Representative)

Effective June 30th, Hi-Tech Seals Inc. has aquired Best Choice Oil & Gas Tools Ltd.

We have enjoyed a solid working relationship for many years thus far and look forward to merging the strengths of each company to better serve our customers. From June 30th to July 31st 2016, Hi-Tech Seals will continue to ship orders from the Best Choice location, in Cypress, TX. June 30th onward, remittances can be mailed to 105 Gladstell St., Conroe, TX 77301, emailed to ar@hitechseals.com, or paid via EFT. Effective August 1st, 2016, all invoices will be completed through Hi-Tech Seals’ Conroe, TX location.

Visit our information page for more information.

Becky Doiron,
Marketing Representative

Date: November 23, 2015
Posted By: Shayla Andersen (Graphic Designer)

Our holiday hours are listed below for each branch.

From everyone at Hi-Tech Seals, we would like to wish you a happy and safe holiday season!

Shayla Andersen,
Graphic Designer

Date: November 25, 2014
Posted By: Tikina Gordey (Graphic Designer)

Our holiday hours are listed below for each branch.

From everyone at Hi-Tech Seals, we would like to wish you a happy and safe holiday season!

Tikina Gordey,
Graphic Designer

Date: November 25, 2014
Posted By: Tikina Gordey (Graphic Designer)

• Transfer Moulding
• Low Temperature Material
• Highly Saturated Nitrile
• HNBR & Vition Sheet Material
• Hi-Tech Seal’s Partnership with Can-Tech Elastomers
• Holiday Hours

Tikina Gordey,
Graphic Designer

Date: February 11, 2014
Posted By: Tikina Gordey (Graphic Designer)

• Tolerance vs. Dimension and Hi-Tech's Micro-Vu Matrix
• Compression Moulding, Technically Speaking
• Cast Urethane Pipe Rollers
• Hi-Tech Seals Edmonton & our new engineering lab
• Hi-Tech Gaskets' 2^nd Anniversary and more!

Tikina Gordey,
Graphic Designer

Date: January 23, 2014
Posted By: Tikina Gordey (Graphic Designer)

Download our newly designed General Product Listing. The GPL is a great introduction to Hi-Tech Seals' family of products & services.
Products include:

• O-rings
• Rod & Piston Seals
• Rotary Seals
• Metal Components
• Vibration Mounts
• Protector Products
• Gaskets
• Manufacturing
• Rubber & Plastic Machining
• Cast Urethane Moulding
• Gasket Manufacturing
• Rubber Moulding

Tikina Gordey,
Graphic Designer

Date: December 3, 2013
Posted By: Tikina Gordey (Graphic Designer)

Our holiday hours are listed below for each branch.

From everyone at Hi-Tech Seals, we would like to wish you a happy and safe holiday season!

Tikina Gordey,
Graphic Designer

Date: November 13, 2013
Posted By: Tikina Gordey (Graphic Designer)

• Thread Manufacturing
• Identifying the Correct Moulding Technique, Technically Speaking
• Conflict-Free Minerals
• High Performance Packing
• Holidays Hours
• Enhancing Our Quality Control

Tikina Gordey,
Graphic Designer

Date: September 12, 2013
Posted By: Tikina Gordey (Graphic Designer)

Tikina Gordey,
Graphic Designer

Date: June 26, 2013
Posted By: Graham Necyk (Marketing Representative)

In 2012, Hi-Tech Seals founded a gasket company by the name of Hi-Tech Gaskets.
Hi-Tech Gaskets has added new exciting manufacturing capabilities, which we are happy
to offer to Hi-Tech Seals customers.

Our Gasket Manufacturing information has expanded under the manufacturing tab
of our website. Take a step-by-step walk through from measurement, design, material
selection and production. We have also added a brief video tour of our manufacturing facility.
Visit the new manufacturing tab to learn more about our manufacturing capabilities. 

Graham Necyk, B.Mgt
Marketing Representative

Date: June 13, 2013
Posted By: Tikina Gordey (Graphic Designer)

Visit the Hi-Tech Seals booth at the 2014 Global Petroleum show in Calgary, Alberta.
The Global Petroleum Show is Canada’s largest Oil & Gas show. The event takes place
every two years and has over 60,000 attendees. For more info, click here.


Tikina Gordey,
Graphic Designer

Date: June 13, 2013
Posted By: Tikina Gordey (Graphic Designer)

This annual oil show is a compilation of the latest technological developments from exploration
through production and brings over 80,000 exhibitors and attendees from around the world.
It will be held at the Reliant Arena in Houston, Texas. For more info, click here.


Tikina Gordey,
Graphic Designer

Date: May 13, 2013
Posted By: Graham Necyk (Marketing Representative)

The June edition of Tech Talk is now available for download.
This edition covers:

• Custom Thread Protectors
• Understanding ASTM Data Sheets
• Urethane Test Gaskets
• Certificate of Conformance & Package Labels
• and more!

Graham Necyk, B.Mgt
Marketing Representative

Date: May 13, 2013
Posted By: Graham Necyk (Marketing Representative)

Download our newly updated 2013 O-Ring Design Guide. The o-ring guide covers gland machining specifications,
metric and imperial sizes, materials and common causes of o-ring failure.

Graham Necyk, B.Mgt
Marketing Representative

Date: May 1, 2013
Posted By: Tikina Gordey (Graphic Designer)

Check out our new Community Events webpage! After much consideration and planning, we have
given the page a makeover to better highlight Hi-Tech Seals' contribution to the community through
donations we've made to charities in the past! The new webpage also features past employee fundraising
events as well as other charties & organizations Hi-Tech has sponsored.

Tikina Gordey,
Graphic Designer

Date: April 16, 2013
Posted By: Graham Necyk, (Marketing Representative)

Join us on June 6th for an open houe at our Winnipeg facility. Winnipeg is home of our cast urethane
molding division, plastic machining and seal distribution centre.

Graham Necyk, B.Mgt
Marketing Representative

Date: February 19, 2013
Posted By: Graham Necyk, (Marketing Representative)

The March edition of Tech Talk is now available for Download.

This Edition:

• Gasket Flashcutter
• 3D Printer
• Machining Dimension Forms
• Oilfield Technical Training Program
• Conroe Open House
• Rubber Bloom, Technically Speaking
• and more...

Date: March 21, 2013
Posted By: Graham Necyk, (Marketing Representative)

All Hi-Tech Branches will be closed on March 29^th for Good Friday.
The offices will be open again the following Monday April 4^th.

Graham Necyk, B.Mgt
Marketing Representative

Date: February 19, 2013
Posted By: Graham Necyk, (Marketing Representative)

The March edition of Tech Talk is now available for Download.

This Edition:

• Gasket Flashcutter
• 3D Printer
• Machining Dimension Forms
• Oilfield Technical Training Program
• Conroe Open House
• Rubber Bloom, Technically Speaking
• and more...

Date: February 14, 2013
Posted By: Graham Necyk, (Marketing Representative)

We have added a new tool for requesting quotes on machining standard sealing and wear components.

How to …

• Proceed to the Manufacturing section
• Select Rubber & Plastic MFG
• Then select Profiles

Date: January 3, 2013
Posted By: Graham Necyk, (Marketing Representative)

Join us at one of our events throughout the year.

OTTP – Oilfield Technical Training Program - April 8-11

Join us for a one-day educational seminar, which covers seals and material technology developments. Our Event has two dates in Edmonton and one available date in Calgary.

OTC – Offshore Technology Conference – May 6-9th

Hosted at Reliant Park in Houston, TX. This annual oil show is a compilation of the latest technological developments branching from exploration through production. Visit Hi-Tech Seals at booth 7410.

Conroe, TX Open House and Crawfish Boil! – May 8th

Join us for an authentic Cajun crawfish boil, hosted at our new Conroe facility.



Graham Necyk, B.Mgt
Marketing Representative

Date: January 3, 2013
Posted By: Graham Necyk, (Marketing Representative)

Hi-Tech Seals extensive machining capabilities allow us to rapidly prototype new components or replicate existing components. Take a quick three-minute tour of Hi-Tech Seals machining facility and capabilities.
View the Video


Graham Necyk, B.Mgt
Marketing Representative

Date: December 3, 2012
Posted By: Graham Necyk, (Marketing Representative)

All of Hi-Tech Seals locations will be closing for the Christmas Holiday beginning at 5 pm on Friday December 21st, and will reopen Thursday, December 27th at 8 am. We will also be closing on December 31st, at 3 pm for the New Years Holiday, and will reopen normal hours on January 2nd.
Our after hours service will still be available during the holidays for urgent requests.


Graham Necyk, B.Mgt
Marketing Representative

Date: November 8, 2012
Posted By: Graham Necyk, (Marketing Representative)

Our December edition of Tech Talk is now available for download. This edition talks about the opening of our Conroe, TX location; launch of our redesigned website; a discussion about our different SpectraSeal® springs and much more!

Graham Necyk, B.Mgt
Marketing Representative

Date: November 8, 2012
Posted By: Graham Necyk, (Marketing Representative)

Hi-Tech Seals is presenting a lunch and learn at the Edmonton Oilfield Technical Society club house on November 15. The one-hour lecture will outline polymer chemistry, manufacturing processes of elastomers, and seal theory. Attendees may buy tickets at the door. Admission fees are $25 per person, which includes the lecture and lunch.
The OTS Club House is located at:
2104 - 156 Street SW, Edmonton

Graham Necyk, B.Mgt
Marketing Representative

Date: November 8, 2012
Posted By: Graham Necyk, (Marketing Representative)

Our December edition of Tech Talk is now available for download. This edition talks about the opening of our Conroe, TX location; launch of our redesigned website; a discussion about our different SpectraSeal® springs and much more!

Graham Necyk, B.Mgt
Marketing Representative

Date: November 5, 2012
Posted By: Graham Necyk, (Marketing Representative)

Our new website has an expanded product section, manufacturing capabilities and new details about services offered by Hi-Tech Seals. Products:

Date: October 1, 2012
Posted By: Graham Necyk, (Marketing Representative)

Hi-Tech Seals has opened a new branch in Conroe, Texas. Contact our customer service staff by phone, email or if you are local, you may visit our service counter.

Ph: 936.206.3124
Fax: 936.756.0538
Email: info@hitechseals.com

105 Gladstell Street
Conroe, TX 77301

Graham Necyk, B.Mgt
Marketing Representative

Date: April 17, 2012
Posted By: Graham Necyk, (Marketing Representative)

Effective April 17th, Hi-Tech Seals has purchased the assets of Gasketmaster & Supply Inc. from receivership. Hi-Tech Gaskets Inc. has been established as a subsidiary of Hi-Tech Seals Inc. Orders can continue to be placed through Hi-Tech Gaskets. We look forward to being able to providing an extended line of sealing products to our customers.

Visit www.hitechgaskets.com to learn about the products we now offer.

Graham Necyk, B.Mgt
Marketing Representative

Date: April 3, 2012
Posted By: Graham Necyk, (Marketing Representative)

Our 2012 product catalogue is now available for download. The 2012 catalogue contains imperial and metric sizes for twenty-six popular product lines. Download a copy now at www.hitechseals.com/catalogue.asp

Graham Necyk, B.Mgt
Marketing Representative

Date: November 17, 2011
Posted By: Graham Necyk, (Marketing Representative)

When Working with Hi-Tech Seals’ urethane division you receive customized solutions. Our engineers can determine the correct formulation to improve your existing components’ performance. In addition, we can provide assistance with the design of new components. Download our flyer to learn more.

Graham Necyk, B.Mgt
Marketing Representative

Date: November 15, 2011
Posted By: Graham Necyk, (Marketing Representative)

We would like to invite you to download Volume 27 of Tech Talk. Our winter 2011 edition of Tech Talk is now available for download. This edition focus on cast urethane products, safety concerns involving explosive decompression, Techtron® an alternative to PEEK and information about available seal training classes. Physical copies are available through a sales representative.
We also encourage you to print off a copy of the word search, find the hidden words and submit it for a chance to win a digital picture frame.

Graham Necyk, B.Mgt
Marketing Representative

Date: May 18, 2011
Posted By: Tony Boken, Branch Manager - Winnipeg

On May 30th, 2011 Hi-Tech Seals Winnipeg will be moving to a new facility located at 445 Egesz Street, Winnipeg, MB R2R 2V5. The new facility allows us to provide increased stock and accommodate Hi-Tech Seals Urethane molding department. Press Release and Map to new location.

Date: May 17, 2011
Posted By: Brian Benkendorf, (Customer Service Manager)

Hi-Tech Seals Inc. invites you to be our guest at the Western Manufacturing Technology Show 2011. Come visit our booth at the Edmonton Expo Center in Northlands between June 14-16.

For more information download the Press release and invitation.

Brian Benkendorf, Materials Engineering T.T
Customer Service Manager

Date: Feb 14, 2011
Posted By: Jim Bond, (President, Hi-Tech Seals Inc.)

Hi-Tech Seals is proud to support the Worlds Longest Hockey Game which is raising funds for the Alberta Cancer Foundation. This years game is hoping to raise 1 million dollars to purchase a new Linear Accelerator (Linac) to be used in radiation treatment at the Cross Cancer Institute. Hi-Tech Seals welcomes all donations to this worthwhile project. Donations can be made in person at any of our Hi-Tech Branches or by contacting one of sales staff by phone. If you prefer you may donate directly to the games official Alberta Cancer Foundation webpage

For more information on the game and it participants please Visit the official Web page. of the game.


Jim Bond
President, Hi-Tech Seals Inc.

Date: Jan 20, 2011
Posted By: Graham Necyk, (Marketing Representative)

Hi-Tech Seals offers BOP and Wireline sealing products such as O-rings, Back-up Rings, T-Seals, Polyseals/Poly-o Seals, Door Seals, Large Bore Piston Seals, Inner/Outer BOP Seals, Stuffing Box Packing, Packoff Oil Savers, G Style Packoff Elements and A3 Elements. In addition, we offer a full line of Baker and Otis vee packing in Kevlar reinforced Nitrile, Kevlar reinforced Fluorocarbon, Kevlar reinforced Aflas™, Ryton and Molyglass PTFE.

For more information download our Blowout Preventer / Wireline brochure.

Graham Necyk, B.Mgt
Marketing Representative

Date: Jan 12, 2011
Posted By: Graham Necyk, (Marketing Representative)

We’ve released a new edition of our Rapid Seal Machining Brochure. The brochure provides information regarding our rapid prototyping capabilities, a material guide and renderings of our pre-programmed profiles. Since our previous edition, we have changed many of our profiles and highly recommend downloading our new brochure. Printed copies are available through a sales representative.

Graham Necyk, B.Mgt
Marketing Representative

Date: Jan 3, 2011
Posted By: Graham Necyk, (Marketing Representative)

We are pleased to announce that Genseal Products Inc. of Winnipeg Manitoba will be merging with Hi-Tech Seals Inc. Genseal Products will rebrand and trade under the Hi-Tech name effective immediately. With this expansion into Manitoba, Hi-Tech now offers customers 5 locations across Canada to help serve our new and existing customers. Read the Press Release here .

Graham Necyk, B.Mgt
Marketing Representative

Date: Dec 2, 2010
Posted By: Graham Necyk, (Marketing Representative)

For the forth year in a row, Hi-Tech Seals is a supplier to the University of Toronto Formula SAE Racing Team. The U of T is one of 500 teams from around the world participating in the collegiate design series called Formula SAE.
Graham Necyk, B.Mgt
Marketing Representative

Date: Dec 1, 2010
Posted By: Graham Necyk, (Marketing Representative)

Hi-Tech Seals winter edition of Tech Talk is now available for download. This edition features articles on our machining department capabilities, new catalogue, laser engraver, and low temperature ratings. We also encourage you to print off a copy of the word search, find the hidden words and submit it to win a digital picture frame.
If you would like to sign up to receive digital copies of our Tech Talk when they become available, please visit our sign up page.

Graham Necyk, B.Mgt
Marketing Representative

Date: May. 28, 2010
Posted By: Graham Necyk, (Marketing Representative)

The new edition of Tech Talk is now available. This edition discusses our 20th anniversary, Surface Flatness testing, our new packaging capabilities, and an article on understanding seal failure.

We also encourage you to print off a copy of the word search, find the hidden words and submit it to win a digital picture frame.

If you would like to sign up to receive digital copies of our Tech Talk when they become available, please visit our sign up page.

Graham Necyk, B.Mgt
Marketing Representative

Date: May 01, 2010
Posted By: Graham Necyk, (Marketing Representative)

Hi-Tech Seals has added a new service to our website! Customers and prospective customers can enjoy our easy-to-use Online Request for Quote form . Users can quickly fill out any product or application information, estimated quantity and material information. Our sale representatives will contact you with a quote as soon as possible.


Graham Necyk, B.Mgt
Marketing Representative

Date: Mar. 09, 2010
Posted By: Graham Necyk, (Marketing Representative)

Oilfield customers may be interested in checking out our updated Oilfield Brochure. The updated brochure contains new images, products, descriptions and a revised layout. The oilfield brochure is available for download or you can request hardcopies from your sales representative.


Graham Necyk, B.Mgt
Marketing Representative

Date: Dec. 21, 2009
Posted By: Graham Necyk, (Marketing Representative)

Is your Equipment breaking down at low temperatures? Hi-Tech Seals is happy to be able to provide Kalrez® parts in new Spectrum™ 0040. Enjoy the broadest chemical resistance at temperatures as low as –42ºC. Please download our cold temperature flyer for more details.


Graham Necyk, B.Mgt
Marketing Representative

Date: Nov. 12, 2009
Posted By: Graham Necyk, (Marketing Representative)

The new edition of Tech Talk is now available. This edition discusses topics such as our new website, Hi-Tech Seals' drafting department, a look at compression set, Hi-Tech Seals' counter service and an article on new high temperature polymer compounds.

We also encourage you to print off a copy of the word search, find the hidden words and submit it to win a digital picture frame.

If you would like to sign up to receive digital copies of our Tech Talk when they become available, please visit our sign up page.

Graham Necyk, B.Mgt
Marketing Representative

Date: Nov. 5, 2009
Posted By: Graham Necyk, (Marketing Representative)

We have added two new customized Kalrez® flyers to the Flyer section of the website. Please click on the flyers below to download the newest versions.

• Kalrez® Pump and Valve
• Prevent Seal Failure with Kalrez®