|
|
|
Standard Cord
Imperial (inches) Standard Cord |
0.063 |
0.094 |
0.103 |
0.125 |
0.139 |
0.188 |
0.210 |
0.250 |
0.275 |
0.312 |
0.375 |
0.437 |
0.500 |
0.562 |
0.625 |
Metric (mm) Standard Cord |
1.60 |
2.00 |
2.40 |
2.50 |
3.00 |
3.50 |
4.00 |
4.50 |
5.00 |
5.70 |
6.00 |
6.50 |
7.00 |
8.00 |
9.00 |
Square Cord
Imperial (inches) Square Cord |
0.103 |
0.125 |
0.139 |
0.210 |
0.250 |
0.275 |
0.312 |
0.375 |
|
 |
| A minimum O-ring inner diameter is required for vulcanizing O-rings. Please see the chart below
for a guideline of popular sizes.
Cross Section |
Min. I.D. |
0.139 |
4.000 |
0.210 |
4.500 |
0.275 |
4.500 |
0.375 |
5.500 |
|
| Cut-Length Calculator |
|
|
|
